Welcome to LiftExpo.com    Join Free or Sign In
» Products » Elevator Components » Overload Controllers » Load cell X-130 Load measurement at the elevator cabin

Load cell X-130 Load measurement at the elevator cabin

Load cell X-130 Load measurement at the elevator cabin
Model: X-130
Country of Origin: Switzerland
Sample Available:No
For product pricing, customization or other inquiries:
PRODUCT DETAILS
Load cell X-130Load measurement at the elevator cabin
  • Area: 0,5/1/2/4/8/12/25kN 
  • Size: 40 x 16 mm mm 
  • Notes: Protected against overload

Scope of application

Elevators: Measuring at the anchor pointSensors can be easily installed for measuring at the machine frame. Only short cables need to used to connect from the measuring location to the electronics. These methods do not affect the existing setup and operation, and are therefore well suited to modernization projects. The sensors incorporate an innovative and effective overload protection system. X-SENSORS offers a unique solution in this area of the market, with multiple proven applications.

Elevators: Measuring underneath the motor frame

Presses: Measuring ring in line with the press strokeWhen the requirement calls for each single stroke of the press to be measured precisely, this is best accomplished using a calibrated sensor mounted directly in the line of force. Using a measuring ring has the advantage of requiring only a minimal increase in the working space. Its inherently protected form allows it to be placed in the working area.


SUITABLE FOR LOAD MEASUREMENT AND AS UNIVERSAL FORCE SENSOR

The load cell X-130 is designed as an OEM load cell. It is suitable for load measurement in elevators, either at the fixpoint or under the cabin floor.

The large measuring range and the standardized design make it possible to cover a large range of car-weights and payloads.

When correctly mounted, the measuring signal is proportional to the payload in the cabin. The solid steel housing and sealed design (IP67) guarantee trouble-free operation, even under difficult environmental conditions.


Characteristics:
  • Compact design in solid steel housing
  • IP67 protection
  • Fits to all X-Sensors load measurement devices and strain gauge amplifiers
  • Small height of only 16 mm
  • With central hole
  • Optionally available with upper base plate and lower base plate for mounting
Depending on the measuring range, the load cell X-130 has a sensitivity of 1.8 mV/V and 2.0 mV/V.  Furthermore, the load cell can be also calibrated with a measuring amplifier from X-Sensors. Using such a calibrated measurement chain, the X-130 can be shipped with a robust industrial signal (e.g. 0-10 V or 4-20 mA).

Switzerland Switzerland
  • Business Type: Manufacturer
  • Founded: 2000
  • Website: www.x-sensors.com
  • Location:
    Landenbergerstrasse 13 Diessenhofen
Didn't find what you're looking for? Please Post Buying Lead