Elevator load control device SenS Lift™
The next generation elevator load control device SenS Lift measures the signals from the load cells and is used to control the elevator’s load.
The device has between 1 and 6 independent measuring channels for full-bridge type load cells. Temperature compensation and digital signal processing are performed for every channel. Sens Lift extends the functionality of the elevator load control device:
1. Simplified installation- Elevator load capacity is set at the site (standard load or user value).
- Calibration is performed by saving empty car weight and for additional percision known weight (for example, installation personnel weight).
2. Simplified controls- The keyboard allows you to choose the data display mode, enter load capacity, calibrations and other data.
- User-friendly English interface (other languages are optional).
3. Universal device for working with different load cells
The device can be used with various types of load cells:
- floor (LA series)
- wire rope (LB series)
- machine bed frame (LD series).
4. Extended relay output functionality- The device generates dry contact relay output signals:
- 15/20 kg (helps to detect a child’s weight)
- 50% of net rated load (emergency evacuation)
- 90% of net rated load (optimization of the elevator)
- 110% of net rated load.
- Relay output "15/20 kg" uses a polarized relay. In case of power outage this allows emergency lightning to go on when passengers are trapped inside.
5. Versatile power supply- The device power supply:
- DC 24V
- AC 110V, 50-60 Hz
- AC 220V, 50 Hz.
- Power consumption is less than 5 watts.
SENS LIFT WITH 4 FLOOR LOAD CELLSSens Lift with floor load cells is used on elevators with fixed floor and the following load capacities, kg:
- 400
- 630
- 1000
- Value, set by user but not more than Net rated load (1,000 kg).